Warm white
This light is under 3300K and its color is similar to warm incandescent light. It gives a warm, healthy and comfortable feeling to user. Applicable to Home, Dormitories, Hotels and other premises or places where the temperature is relatively low.

White or Pure white
It is a neutral color with temperature range between 3300-5300K. It is neutral, soft and mostly used in Shops, Hospitals, Offices, Restaurant, etc.

Cool white
It is also known as day light color. Its temperature is more over 6000K. This light source is very close to natural light. It gives a bright feeling and hence used in Offices, Classrooms, library and Exhibitions.

Description and Features:

This 2.4G RF module is with 2 output channels and adopts high performance Wireless Transceiver RF IC. It works at 2.4GHz – Free Microwave ISM band and communication is via GFSK modulation mode. It is Embedded with programmable space and built in with Color Control and Brightness Dimmable program. This module have 2K EEPROM data register and memory storage. Multi devices can be controlled by One Remote and configured with auto hopped frequency function.

There is power management IC on the RF module which allows to connect DC 300V directly to RF module. This RF module is integrated with crystal and Whip Antenna. Customer can easily match remote and module. This 2.4G RF module is configured with multi-functions, high performance, low power consumption, Small Volume, low cost and high integrated ratio. It is suitable for outdoor and indoor CCT Dimmable Led Lighting.

• MCU – High performance with low power consumption
• 2400-2483.5MHz – Low cost with low power consumption RF Module
• General 2.4GHz ISM Microwave Band Range
• Transmission Speed: 1Mbps
• Programmable RF Module Power, Max Power: +8dBm

FUNCTION EXPLAIN PIN

1. 120V-360V Dc voltage input
2. NC
3. power GND
4. 12V Dc output
5. photoelectric separation output
6. Empty, spare
7. Auxiliary light output
8. 50Hz frequency pin, require in series current limiting resistor
9. warm light PWM output
10. white light PWM output

TECHNICAL PARAMETERS

• 120V-360V DC input voltage
• DC 12V output maximum current: 80mA
• 2.4G module Dc working voltage: 3.3V
• receiving sensitivity: 90dBm
• working Hz: 2400-2483MHz
• GFSK (modulation system)

2.4G RF Remote (12 Keys)

Button Function：

1. Switch ON: Short Press Turn on, Long Press – (It will give the last setting of brightness and color if switched off by remote)
2. Switch Off: Short Press Turn off, Long Press – (It will clear the last setting of brightness and color if switched off by remote)
3. Brightness+: Short Press on – Stepless levels brightness adjustment. Long press – Stepless Continue control from 0-100%
4. Brightness-: Short Press on – Stepless levels brightness adjustment. Long press – Stepless Continue control from 100-0%
5. K+ Button: Adjust warm white Brightness
6. K- Button: Adjust Pure white Brightness
7. Night Light Mode: Press this button will change to night light mode with brightness 20%
8. Warm White Mode: 100% Warm White + 0% Pure White
9. Pure White Mode:100% Pure White + 0% Warm White
10. Full Mode: 100% Pure White + 100% Warm White    
11. Group Buttons can be as per two channel or four channels remote.
12. Group Buttons can be as per two channel or four channels remote.